Pano Two | RTX 5070 12GB + Ryzen 7 7800X3D White | Ready-to-Go Gaming PC | PC36

🤍 Pano Two

The white build that stops being an entry machine

Pano Two pairs a Ryzen 7 7800X3D with an RTX 5070 inside the MSI MAG Pano M100R PZ in white, a case with tempered glass wrapping 270 degrees around the front and side and no metal pillar at the corner. The glass is not tinted. You see everything, from every angle, in full daylight.

The 7800X3D is the step that matters here. It is the processor that made X3D the default recommendation for gaming, and it means the graphics card is what limits this machine rather than the chip driving it. That stays true through a card upgrade or two.

Everything else follows the same rule as the rest of the series: white board, white cooler, white power supply with white cables, and six ARGB fans, because in a pillarless glass case there is nowhere to hide anything that is not.

🧬 Built to last, designed to evolve

This system is built on AMD's latest AM5 platform, which offers one of the best upgrade paths available today. That means you can start with a great processor now and still have room to move up the stack later, while keeping the same motherboard, case, power supply and most of your core components. The case takes graphics cards up to 390mm and the power supply is deliberately larger than this build needs, so the obvious upgrade in a couple of years is a straight swap rather than a rebuild.

📃 Specifications

• 🧠 CPU: AMD Ryzen 7 7800X3D
  Click or tap for deeper spec info

  • 8 cores, 16 threads of Zen 4 with 96MB of L3 cache, courtesy of AMD's 3D V-Cache stacked directly onto the compute die
  • The chip that made X3D the default recommendation for gaming. That cache means the processor spends far less time waiting on memory, and it shows up in frame times and 1% lows rather than just benchmark averages
  • Remarkably efficient with it. In games it draws well under 100W while performing like a chip that draws far more, which is why a 240mm cooler is genuinely sufficient here rather than a compromise
  • The processor is deliberately ahead of the graphics card on this build. That is the right way round: it means a card upgrade later gives you the full benefit rather than running into a processor bottleneck
  • Worth knowing: the 7800X3D is not overclocked by raising multipliers, because AMD limit voltage on the stacked cache for good reason. It responds instead to a per-core Curve Optimiser undervolt, which is what our optimisation options do
• ❄️ CPU cooler: Thermalright Aqua Elite V6 240mm ARGB liquid cooler, white
  Click or tap for deeper spec info

  • A 240mm all-in-one liquid cooler with two 120mm ARGB PWM fans, mounted in the roof of the case as exhaust
  • 240mm is comfortably enough for a 7800X3D. This is not a hot chip, it is a fast one, and a larger radiator would buy a couple of degrees you would never see
  • The roof is the only radiator position in this case. The Pano M100R takes a radiator in the top and at the rear, and nowhere else. There is no front, side or bottom radiator mount, because the front and side are glass. That constraint shapes the whole build and it is why the cooler sits where it does
  • White radiator, white block and white fans, matched to the rest of the machine
  • Liquid cooling adds real assembly time compared with a tower cooler. That work is included in the price rather than added to it
• 🔲 Motherboard: MSI B850M GAMING PLUS WIFI6E (micro-ATX), white
  Click or tap for deeper spec info

  • A white circuit board with silver heatsinks over the power delivery and the primary M.2 slot. This is why it is here: white micro-ATX boards are scarce, and in a case with untinted glass the board is one of the largest surfaces you see
  • MSI's 10+2+1 Duet Rail power design on a six-layer board with thickened copper. Plain English translation: substantially more power delivery than a 7800X3D asks for. X3D chips are limited by voltage rather than current, so this board is never the constraint
  • PCIe 4.0 x16 graphics slot with steel reinforcement. Nothing at this tier comes close to saturating it, and the metal bracing is what matters day to day when a card is hanging off the slot
  • Two M.2 slots. The first is PCIe Gen5 x4 and comes with MSI's Shield Frozr heatsink fitted, and the second is Gen4 x4 with a tool-free clip and no heatsink. One stays free on this build
  • Four DDR5 slots supporting up to 256GB, with two free on this build. Four SATA ports as well
  • Wi-Fi 6E, Bluetooth 5.3 and 2.5 Gigabit Ethernet. Wi-Fi 6E adds the 6GHz band, and 2.5G wired is a genuine step up from the gigabit ports found on most boards at this price
  • A BIOS Flashback button and a Clear CMOS button on the rear panel, plus four diagnostic LEDs for processor, memory, graphics and boot. Builder's features rather than buyer's, but they are part of why we choose this board
  • Realtek ALC897 audio, the standard codec at this board size and fine for a USB or wireless headset, since those bypass it entirely
  • Three addressable RGB headers and one standard RGB header, which is what ties the case lighting to the cooler
  • PC36 only uses motherboards chosen for stability and longevity. See our Trusted brands page
• 📏 Memory / RAM: 32GB (2×16GB) DDR5-6000 CL36
  Click or tap for deeper spec info

  • EXPO-tuned dual channel DDR5-6000 CL36, the speed and timing combination Ryzen responds to best on AM5. We fit CL36 as standard rather than the slower CL40 kits often used at this price
  • Two matched sticks in dual channel, unlike the single stick in Pano One. On an X3D processor the memory matters a little less than it does on a normal chip, because the cache absorbs much of it, but dual channel is the right call at this tier regardless
  • 32GB is comfortable headroom for gaming, streaming and creative work at once, and two slots stay free if you ever want more
  • Specification guaranteed, model may vary. Happy to confirm the exact part on request
• 💾 Storage: 1TB NVMe PCIe 4.0 SSD
  Click or tap for deeper spec info

  • Rated at 5,000MB/s or better. Games load in seconds and Windows feels instant
  • This is a QLC drive, which is the honest tier for this price. It is quick for everything you will do day to day, and it slows down only during very long sustained writes such as moving hundreds of gigabytes in one go. For gaming and normal use you would not notice the difference
  • We fit 1TB as standard across the whole range rather than varying it by price, so comparing our machines to each other is straightforward. The 2TB option is below
  • The drive goes in the Gen5 slot under its heatsink, and the second M.2 slot stays free. Worth knowing that this case only takes two conventional drives, so M.2 is the sensible expansion route here
  • Specification guaranteed, model may vary. Happy to confirm the exact part on request
• 🎮 Graphics card: NVIDIA RTX 5070 12GB, white
  Click or tap for deeper spec info

  • 12GB of GDDR7 on a 192-bit bus. This is the tier where 1440p at high and ultra settings stops needing compromises, and where 4K becomes realistic with DLSS doing some of the work
  • DLSS 4 with multi frame generation, and the ray tracing hardware to make ray traced games playable rather than theoretical. This is where NVIDIA's lead over Radeon is real and worth paying for
  • NVENC for streaming and recording, which is the encoder most streaming software prefers and handles best
  • A white card, chosen to match the rest of the build. White versions cost more than the standard black ones and are harder to source, which is part of what a whiteout build actually involves
  • Around 250W under load. The case takes cards up to 390mm, which no 5070 comes close to, so card choice here is unrestricted
  • The chipset and VRAM are guaranteed: it will always be an RTX 5070 with 12GB. The AIB brand varies with availability, and we only use established manufacturers. See our Trusted brands page for more info
• 🧰 Case: MSI MAG Pano M100R PZ, White
  Click or tap for deeper spec info

  • 440 × 235 × 405mm. Micro-ATX and Mini-ITX, five expansion slots
  • 270 degrees of tempered glass with no pillar at the corner. The front and side panels meet without a metal post between them, so the view into the machine is genuinely uninterrupted. The glass is not tinted, which is unusual and is exactly why this case suits a white build
  • Four 120mm ARGB fans included, and three of them are reverse-blade, which matters here more than anywhere. More on that in the cooling section below
  • An ARGB and PWM control board is fitted from the factory, driving all four fans from a single motherboard connection, with a lighting button on the front panel
  • Graphics cards up to 390mm and CPU coolers up to 175mm. Neither is close to being a limit on this build
  • Front I/O is a USB-C port, one USB-A, a combined headphone and microphone jack, a power button and a lighting button
  • MSI include an aluminium graphics card support stand with a built-in spirit level, which we fit and set properly. On a heavy card in a glass case, a sagging graphics card is the thing that spoils the look first
  • The case also supports back-connect motherboards, the kind with the sockets on the reverse. We build with conventional boards as standard, but the chassis is ready for one
  • Two drive mounts only: one 2.5 inch, and one that takes either a 2.5 or a 3.5 inch drive. That is limited, and it is why the M.2 slots on the board matter
• 🌬️ Case cooling: 4 × 120mm ARGB fans included with the case, 3 of them reverse-blade side intake, plus the cooler's 2 × 120mm roof exhaust
  Click or tap for deeper spec info

  • Three 120mm reverse-blade ARGB fans in the side position as intake, and one 120mm ARGB at the rear as exhaust. All four come with the case, which is unusual and genuinely good value
  • Reverse-blade is the detail that makes this case work. A normal fan shows you its frame, its motor hub and its wiring from the front. A reverse-blade fan is built the other way round, so what faces the glass is the blade face. Behind untinted, pillarless glass that is the difference between looking designed and looking assembled, and MSI fitting them as standard is the main reason we use this chassis for the white series
  • Six fans in total once the cooler is counted, all ARGB, all driven together. Cool air enters through the side alongside the graphics card, and heat leaves through the roof and the rear
  • Fan and pump curves are set by hand before dispatch and verified through our standard stress testing rather than assumed
  • A sub-100W processor and a 250W graphics card with six fans is a comfortable load rather than a difficult one. This machine is quiet in normal use and only becomes audible when you ask everything of it
• ⚡ Power supply: Thermaltake Toughpower GT Snow 750W 80+ Gold, fully modular, white
  Click or tap for deeper spec info

  • White unit with white cables. That second part is the reason it is here: almost no power supply ships with white cables, and on a whiteout build in a pillarless glass case a black cable loom is the thing that ruins it
  • 750W with a 250W graphics card and a sub-100W processor means the unit sits in the quiet, efficient middle of its range under a full combined load rather than working near the top of it
  • The headroom is for upgrades. This unit will run an RTX 5070 Ti or an RX 9070 XT without being replaced, so a graphics card upgrade in two years is a straight swap
  • Fully modular, which matters here. The cable chamber behind the motherboard tray is 33mm deep, so every cable this build does not use is one less thing competing for that space
  • ATX 3.1 certified. All PC36 power supplies of 750W and above are ATX 3.1 certified
• 🔌 Cabling: White cabling throughout
  Click or tap for deeper spec info

  • White cables from a white power supply, routed through the tray and tied down with the case's own fixings
  • The cable chamber is 33mm deep, which is workable rather than generous, and this case gives you nowhere to hide an untidy job. It is where a large share of the assembly time on a Pano goes
  • Braided white cable extensions are available if you want the visible runs to look even better. See the upgrade options below
• 📶 WiFi / Bluetooth / Ethernet: Wi-Fi 6E, Bluetooth 5.3 and 2.5 Gigabit Ethernet, included
  Click or tap for deeper spec info

  • Built into the MSI B850M GAMING PLUS WIFI6E. No separate adapter needed, and the aerial is supplied in the box
  • Wi-Fi 6E adds the 6GHz band, which is usually far less congested than 2.4 and 5GHz if your router supports it. It is fast, stable and well ahead of any UK domestic broadband connection
  • Bluetooth 5.3 for controllers, headsets and peripherals
  • 2.5 Gigabit wired Ethernet, which we would still recommend for competitive play
  • If you specifically want Wi-Fi 7, the X870 motherboard upgrade in the options below covers it, along with USB4
• 🪟 Operating system: As chosen by you from the listing options below. Windows 11 Home (OEM) is recommended.
• 🧹 Setup and optimisation: PC36 High-Class Standard. Full stress test with certificate, bloat-free installation, and BIOS set up properly
  Click or tap for deeper spec info

  PC36 High-Class Standard, included free with every build

  • Ready the moment you open the box. Your PC boots straight into Windows with a local account already set up. No account sign-in wall, no first-run questionnaire, no half-hour of setup before you can use the machine you just bought
  • BIOS updated and configured properly: manual fan curves, PBO enabled, EXPO enabled, Secure Boot enabled
  • Vanilla Windows 11 installation if you choose Windows, with no bloatware added by us, and all drivers loaded and ready to go
  • Full stress test with certificate. Every system is torture tested on CPU, RAM and GPU before dispatch, and ships with the certificate to prove it

  PC36 Premier Optimisation, available in the listing options

  • CPU tuning to bring thermals and noise down with minimal performance loss, plus a deeper strip and debloat of Windows and a hand-tuned fan and pump profile
  • Worth taking on this build. The 7800X3D responds very well to a per-core Curve Optimiser undervolt, and on a liquid cooled machine the pump curve matters as much as the fans. Left at defaults, most AIOs run the pump far harder than they need to

  PC36 Ultimate Performance Tune, available in the listing options

  • Advanced overclocking: memory tune, CPU tune and GPU overclock on top of everything in Premier
  • Being straight about the ceiling. The 7800X3D cannot be overclocked by multiplier, so the CPU portion here is an undervolt rather than a clock increase. The real gain is on the graphics card, where a 5070 has genuine headroom and this case has the airflow to support it. Worth it if you want the last few percent, but Premier gets you most of the benefit for a fraction of the cost
• 🛡️ Warranty: 3 years parts & labour (return to base)
  Click or tap for deeper spec info

  • Standard 3-year coverage included, parts and labour both
  • Optional extended warranties in the listing options below

👁️ Transparency notes

• The motherboard is white, but its slots, ports and headers are black, as they are on nearly every board made (click or tap to read more)

  The circuit board and the heatsinks are white and silver. The memory slots, the graphics slot, the SATA ports and the small headers are black, as they are on essentially every board made. In a case with untinted glass you will see those, so it is worth picturing accurately rather than being surprised.

• Product images are representative photos of a similar spec in the same style. Your PC will look similar but not identical. Our support team can help clarify anything you're unsure of.

🛠️ Popular upgrade options

• Quick-add upgrades. This listing has a set of one-click upgrades chosen to fit this exact build, each one priced, in the Quick-add Upgrades section on this page. Memory, storage, optimisation, the anti-sag bracket and the extended warranty are in the build options instead. Anything not shown in either place, ask us on live chat and we will price it.
• Graphics card upgrade to RTX 5070 Ti 16GB: choose it from the quick-add upgrades, or speak with us via live chat.
  Click or tap for more info

  The upgrade that changes what this machine is for. The 5070 Ti moves it from a very good 1440p machine to a genuine 4K one, and adds 16GB of memory. The 750W supply and the 390mm of card clearance both take it without any other change. Worth comparing against Pano Three on live chat before you decide, since that build pairs a faster card again with a 9800X3D and a 360mm cooler.

• Storage upgrade to 2TB: available in the listing options below.
  Click or tap for more info

  Worth it for most people at this tier. Modern AAA installs regularly run past 150GB each, and a 1TB drive fills faster than you expect. You can defer it, since the second M.2 slot stays free, but note this case only takes two conventional drives so M.2 is where any extra storage will live.

• Braided white cable extensions: available in the listing options below.
  Click or tap for more info

  This is the range where cable extensions earn their money. Pillarless untinted glass across two faces means the visible cable runs are genuinely part of the design, and sleeved white extensions finish the job properly. Purely cosmetic, but of all our cases this is the one where it shows most.

• X870 motherboard upgrade: available in the listing options below.
  Click or tap for more info

  Worth reading rather than assuming. This swaps the board for a Gigabyte X870M AORUS ELITE WIFI7, and three things genuinely change. Wi-Fi 7 instead of Wi-Fi 6E. Two USB4 ports at 40Gbps, which no B850 board has, for docks, very fast external drives and DisplayPort over USB-C. And the audio codec moves from ALC897 to ALC1220, taking the signal-to-noise ratio on the analogue output from around 97dB to around 120dB, with dedicated audio capacitors and PCB isolation.

  The honest part. The audio improvement applies only to wired 3.5mm headphones and speakers. A USB headset, a wireless headset, HDMI to a TV, or an external DAC all bypass the codec entirely and sound identical. Wi-Fi 7 does nothing without a Wi-Fi 7 router. And it will not give you a single extra frame per second. It is a connectivity upgrade, not a performance one, and at this tier we would put the money into the graphics card first.

• Memory upgrade to 48GB or 64GB: available in the listing options below.
  Click or tap for more info

  Worth it if you edit video, run virtual machines or work with large 3D scenes. For gaming, including heavily modded gaming, 32GB is not the limit here. Two slots stay free either way, so this is genuinely a decision you can defer.

• CPU upgrade to Ryzen 7 9800X3D: choose it from the quick-add upgrades, or speak with us via live chat.
  Click or tap for more info

  Faster than the 7800X3D and, unlike it, genuinely unlocked for overclocking. Worth it if you play at high refresh rates in CPU-limited titles, or if you intend to keep the machine through several graphics card upgrades. At 1440p with this card the difference is small, so we would take the graphics card upgrade first.

• Extended warranty: available in the listing options below.
• Anything else: speak with us via live chat. A black build in the same case, a different card, a bigger cooler. We build these to order, so most things are possible if you ask before you buy.

🎯 What is this PC best for?

• 1440p gaming at high and ultra settings in modern titles
• High refresh competitive gaming, where the 7800X3D's cache sets the ceiling rather than the card
• Ray tracing and DLSS 4 multi frame generation in supported titles
• Streaming and recording with NVENC while playing
• Anyone building a white desk setup who wants the PC to be part of it rather than hidden under it
• Buyers who care what the inside of the machine looks like as much as what it scores

📊 Performance estimates

Figures are 1440p. Performance varies with game updates, maps, settings and background apps. These are estimates, not guarantees.

Fortnite - Competitive Settings (click or tap to expand)

1440p: 300-370 FPS
Native testing (no upscaling or frame generation).

Cyberpunk 2077 - Ray Tracing Medium (click or tap to expand)

1440p: 90-115 FPS
Upscaling set to Auto (DLSS / FSR / XeSS based on GPU).

Battlefield 6 - High Settings (click or tap to expand)

1440p: 120-150 FPS
Native testing (no upscaling or frame generation).

DaVinci Resolve - PugetBench Standard (click or tap to expand)

Estimated score: 7,000-7,500

💬 Need help?

Not sure if this is the right spec for you? Ping us on live chat and we'll help you choose the perfect PC for your games, work and budget. You'll be talking to one of us, not a chatbot.